Rapid prototyping and facile customization of conductive hydrogel bioelectronics based on all laser process

초록

Proper customization in size and shape is essential in implantable bioelectronics for stable bio-signal recording. Over the past decades, many researchers have heavily relied on conventional photolithography processes to fabricate implantable bioelectronics. Therefore, they could not avoid the critical limitation of high cost and complex processing steps to optimize bioelectronic devices for target organs with various sizes and shapes. Here, we propose rapid prototyping using all laser processes to fabricate customized bioelectronics. PEDOT:PSS is selectively irradiated by an ultraviolet (UV) pulse laser to form wet-stable conductive hydrogels that can softly interact with biological tissues (50 mu m line width). The encapsulation layer is selectively patterned using the same laser source by UV-curing polymer networks (110 mu m line width). For high stretchability (over 100%), mesh structures are made by the selective laser cutting process. Our rapid prototyping strategy minimizes the use of high-cost equipment, using only a single UV laser source to process the electrodes, encapsulation, and substrates that constitute bioelectronics without a photomask, enabling the prototyping stretchable microelectrode array with an area of 1 cm (2) less than 10 min. We fabricated an optimized stretchable microelectrode array with low impedances (similar to 1.1 k Omega at 1 kHz) that can effectively record rat 's cardiac signals with various health states.

키워드